86-757-88269953
2, Changchun Road, (Yangmei) Yanghe Town, Gaoming District, Foshan, Guangdong, China (Mainland)
CE ISO approved JFUJI VVVF automatic escalator cost | price escalator | escalator parts
We promote:
No afraid of falling down elevator-------safety elevator lift
1.safety: when the light turn red in the doorsill,"Red light stop, green light go" warning passengers to take the elevator, pay attention to whether the elevator stops or not, which can remind the passengers by visual and auditory .
2.Three handrails in the cabin as standard, and we promote that no afraid of falling down elevator.
3 Electric control cabinet door with safety running protection switch, no dust, no destroy, and promise its longlife service.
JFUJI (HOMEFRIEND & FUJI ELEVATOR CO., LTD), as a modern Sino-Japanese joint venture focusing on elevator manufacturing and engaging in production, cooperative research & development with vendors, as well as after-sales services including sales, installation and maintenance, was jointly established by Guangdong Buzhi Industry Investment, Hong Kong Sumitomo Industry (Group) and Japan Fuji FA System Co., Ltd.
The Company is situated in Foshan, Guangdong, one of two largest elevator manufacturing sites in China. It has total investment of 53 million dollars ($) and floor space of about 200 acres, and boasted a production center, R&D and training center and marketing service center; It is known as one of most competitive and powerful elevator manufacturers and service providers in the world by introducing Japanese RMADA multi-station CNC punching machine, CNC shearing machine and CNC bending machine and other world-class production and test equipment as well as scientific and rigorous management models and providing manufacturing capacity of 10000 sets per year.
The exquisite moving walkway incorporating internationally leading technologies and design style is manufactured to suit Chinese characteristics. The moving walkway characterized by refined orientation, exquisite appearance, smooth operation and easy maintenance provides passengers with a brilliant and comfortable environment, enabling them to appreciate the charismatic nature and luxurious style of modern architecture.
Description:
1. Optional optoelectronic scanning 2. frequency converting reduce mechanical wear while saving energy
3. Modular design
Main Configuration (standard) | ||||
Lifting height | As your requirment | |||
Horizontal span | As your requirment | |||
Angle of inclination | 35° | |||
Step width (mm) | 800 mm | |||
Speed | 0.5m/s | |||
Pit depth | At least 1100mm | |||
Horizontal step | Two | |||
Powre voltage | 380 v | |||
Lighting voltage | 220 v | |||
Frequency | 50hz | |||
Arrangement | Single | |||
Controller | Omron | |||
Traction machine | Torin | |||
Motor | Jia li | |||
Truss | Grey angle | |||
Balustrade | Tempered safety glass 10mm | |||
Balustrade height | 900mm | |||
Handrail | Black | |||
Handrail frame | Stainless steel | |||
Chain | Aoda | |||
Chain roller | Aoda | |||
Inner and decking | Hairline stainless steel | |||
Skirting assy | Hairline stainless steel | |||
Landing plate assy | Stainless steel | |||
Contactor | Schneider | |||
Step | Stainless steel |
Application:
Escalators have widely use at public spaces like malls, shopping centers, hotels and office skyscrapers.
As a brand-new design, the sleek handrail entrance/exit exhibits a modern sense while assuring safety protection.
Professional and efficient drive unit.
Crisp lines sketch a quiet and comfortable space.
The unique structure of handrail meet the requirement of the special applications.
Product coverage:
Specification:
Escalator 35 degrees
Technical Requirements
1. According to safety regulations, the truss for escalator where the step width is 600mm has to be extended by 417mm.
2. If L>15000, escalator has to be furnished with intermediate support.
3. A lifting structure whose bearing capacity is higher than that of R1 and R2 shall be arranged above R1 and R2, respectively.
4. Power supply specification is "3-phase, 380VAC±7%, 50HZ, 40A". Lighting source: Single-phase 220VAC, 15A. User shall provide a ground terminal of which the ground resistance is not more than 4Ω. Three-phase fire-wire system (by customer) shall be employed for power supply.
5. Power supply and lighting source shall be separated from each other. Null line shall be isolated from ground line all the time.
6. A free access area that is at least 1.5m wide and 2.5m long (from the turning end of handrail) shall be set up respectively at escalator's upper and lower entrances/exits, and its ground illumination shall not be less than 50Lx.
7. Embedded iron pieces for upper and lower spandrel girders shall be fabricated by customer; the levelness embedding shall not be more than 5mm.
8. The upper and lower spandrel girders shall be perpendicular to the side face of escalator's end fit, and the perpendicularity shall not be more than 5mm.
9. Where escalator is arranged at ground floor, it's important to set up concrete pit that is free of water seepage; concrete pit is not necessary if escalator is installed on the second or higher floors.
10. These technical requirements are an integral part of the escalator civil layout.
Escalator 30 degrees
1.According to safety regulations, the truss for escalator where the step width is 600mm has to be extended by 417mm.
2.If L>15000, escalator has to be furnished with intermediate support.
3.A lifting structure whose bearing capacity is higher than that of R1 and R2 shall be arranged above R1 and R2, respectively.
4.Power source: Power supply specification is "3-phase, 380VAC±7%, 50HZ, 40A". Lighting source: Single-phase 220VAC, 15A. User shall provide a ground terminal of which the ground resistance is not more than 4Ω. Three-phase fire-wire system (by customer) shall be employed for power supply.
5.Power supply and lighting source shall be separated from each other. Null line shall be isolated from ground line all the time.
6.A free access area that is at least 1.5m wide and 2.5m long (from the turning end of handrail) shall be set up respectively at escalator's upper and lower entrances/exits, and its ground illumination shall not be less than 50Lx.
7.Embedded iron pieces for upper and lower spandrel girders shall be fabricated by customer; the levelness embedding shall not be more than 5mm.
8.The upper and lower spandrel girders shall be perpendicular to the side face of escalator's end fit, and the perpendicularity shall not be more than 5mm.
9.Where escalator is arranged at ground floor, it's important to set up concrete pit that is free of water seepage; concrete pit is not necessary if escalator is installed on the second or higher floors.
10.These technical requirements are an integral part of the escalator civil layout.
Moving walkway - 10, 11, and 12 degrees
1.Where L>30000, it's essential to set up two intermediate supports.
2.The entrance/exit of moving walkway shall be furnished with fully unimpeded area for accommodating passengers, and the width of such area shall at least be equal to the distance between handrail strap centerlines, while its size in depth shall at least be 2.5m. If the width of such area is more than 2 times the center-to-center distance of handrail strap, its size in depth could be reduced to 2m.
3.User shall provide adequate and appropriate lighting for escalator and its surrounding areas.
4.Where the distance between handrail centerline and any obstacle is less than 500mm, user has to arrange an at least 300mm-high sharp edge-free vertical anti-collision baffle above outer cover plate.
5.User shall configure power sources depending on site conditions: Power supply specification should be "380VAC±7%, three-phase five -wire system, 50Hz; lighting source 220VAC. Null line and ground line shall be separated from each other, and the ground resistance shall not be more than 4Ω.
Certificate: ISO 9001 & CE
Workshop:
Project:
Packing:
FAQ:
1. Inquiry: Please send us inquiry from alibaba, we will send you quotation to you within 24 hours, when you sent us inquiry, please offer quantity, load capacity, rated speed, and how many floors, stops, openings
2. Production lead time: Standard product is about 25 days
3. Package: plywood case for separate packing mode
4. Payment: 30% T/T down payment and balance shall be paid before loading, please note that it will take 3-5 days for us to receive the dollar remittance, which not include the off day of bank;
5. Warranty period: 12 months after the delivery.
6. Installation and maintenance: We have the professional maintaining team, which can provide guidance for high quality installation and maintenance.
7.Factory location: Foshan city which is one hour’s drive from Guangzhou city.
8.Port of loading: Guangzhou,Shenzhen,foshan or as request
AGENTS WANTED For our global market strategy, now we are looking for agents and partners all over the world. Your success is the vital part of ours. We will keep close cooperation and help you grow with us. Let’s face the future together ! In order to provide good after sale service for our customer, our partners (agents) should have the capacity to do the installation, repair and maintenance work. We will provide the technique and engineering training if necessary. You have all our support! Looking forward to meeting you soon and visit us!
Contact information:
Manager | Sunshine |
Factory ADD | No.2.Changchun Road, Yanghe Town, Gaoming District, Foshan City, Guangdong Province, China |
What's app | 0086- |
Skype | sunshine.du64 |
QQ: | 2484289386 |
sunshine.du0811 at foxmail.com at 163.com |